Välj sida

The 10 design commandments for cutting your building’s embodied carbon

How to reduce embodied carbon in the built environment

Reducing embodied carbon in buildings is critical to achieving net zero and carbon neutral construction targets. Yet there is much uncertainty about how to reduce embodied carbon. Here, we have distilled some of the most effective approaches into 10 easy-to-follow design rules or commandments.

Baseline building design

With a focus on practical solutions, we have created an example baseline building design to quantify the potential impact of adopting these practices. Our baseline design achieved embodied carbon reductions of a third, with potential for cost savings in materials too when retaining traditional structural material.

Baseline building design

  • 7000 m2 (75,350 ft2) office building
  • 7 above-ground floors of each 1000 m2 (10,760 ft2)
  • 2 underground parking levels
  • Precast concrete frame
  • 60-year assessment period, assuming that the building would be kept in a condition for leasing to third parties.

Before you start

When you begin working on embodied carbon, make sure that your building has a decent energy performance and whatever low carbon energy supply options your locality can offer. Avoid sites where transport relies on private cars or with long transport distances for users. These provide a solid basis for further decarbonization.
1

Do not build for the short term: ensure the demand supports a permanent building

Optimizing the life-cycle impacts for anything less than a 60-year span is not worthwhile. If the need for the building is not sustainable, for example, due to ongoing demographic change or zoning changes elsewhere. This may be addressed by designing either a building that’s highly adaptable or with a modular transportable building that satisfies the demand for a shorter period of time.

Potential carbon savings in the baseline building

40-50%

If the service life is limited to 25 years, the annualized materials-driven carbon impacts are 120% higher. If the building can be converted to another use, the impact is reduced even further.

NOTE: for commandments 2-10, we have used a 60-year building lifespan scenario to more accurately depict the impact of each measure.

2

Avoid sites requiring soil stabilization and deep foundations

Soil conditions greatly impact the stabilization and foundations your project will require. If your site requires massive foundations to support the building, reconsider the site. If you are committed to the site, see if you can place the building mass on the site to optimize the distance to bedrock as it likely varies within the site, and also consider opting for a less heavy structural solution, for example, timber or steel. Finally, avoid cast-in-place concrete, which tends to result in the heaviest of all structural solutions.

 One Click LCA’s Site Designer enables you to assess geotechnical conditions and land use change factors, based on ready-made scenarios. We also offer ready-to-use foundation scenarios for various soil conditions with five-meter depth intervals using different foundation technologies as well as soil stabilization and soil movement prevention.

Potential carbon savings in the baseline building

30% The foundations share of embodied carbon impacts is 40% when also considering replacements during life-cycle (not needed for foundations).

NOTE: for commandments 3-10, we have assumed good soil conditions and used a 60-year building lifespan scenario to more accurately depict the impact of each measure.

3

Consider structural options: could a lighter or timber frame work?

Choosing wood structures, when the requirements allow for it, can reduce embodied impacts substantially in most projects. In our example building, this embodied carbon reduction – when measured over the whole life-cycle – would lead to a reduction of around 30%.

One Click LCA’s Carbon Designer tool allows users to quickly evaluate the impacts of common structural materials using building geometry.

Potential carbon savings in the baseline building

30% The share of embodied carbon impacts for structural materials is always substantial, and in our example building, nearly three quarters.
4

Choose low-carbon products: set clear requirements and select the right suppliers

Setting environmental performance requirements for materials and products is an effective way of reducing impact while achieving exactly the same design and performance. The requirements could specify minimum carbon performance targets or other measures such as stipulating the use of recycled binders for concrete, for example. This strategy works effectively for all materials where supply is competitive and some suppliers are willing to supply products with improved environmental performance.

One Click LCA’s materials database contains over 10,000 different construction materials environmental impact profiles for different products, technologies, suppliers and products. There’s also a module to create your own product mixes e.g. for specific concrete recipes, and you can send us any new EPDs that you plan to use if you do not find them in the database.

Potential carbon savings in the baseline building

10% In the example building, when structural concretes and steels were changed to lower impact products, the whole building materials life-cycle impacts were reduced by 10%. Looking carefully at what you source can make substantially greater reductions.
Example from One Click LCA database: Embodied carbon impacts of concrete range from below 200 to over 500 kg CO2e / m3
5

Optimize the building shape: achieve mass reduction with a compact shape

As a general rule, a simple shape is more materials- and energy-efficient. Building in a square shape is not always possible due to daylighting, zoning, functional, or space distribution requirements. A more complex building shape drives external walls demands, and also requires additional access corridors. If the building requires additional staircase and elevator shafts in different locations, this also creates demand without additional corresponding available room area.

One Click LCA’s Carbon Designer allows users to consider the impacts of the number of floors, building shape, floor height and additional parameters for the materials demand as well as resulting embodied carbon impacts.

Potential carbon savings in the baseline building

10% If the example building were built as a three-storey elongated building, the embodied carbon impacts would be approximately 10% higher. Also, this increases the envelope area, and, as a result, the energy loss via the building envelope.
6

Design thinner floor slabs: reduce both slab and envelope material use

Slabs are a major contributor to the embodied carbon of a building. Unlike the envelope area, the amount of slabs scales linearly with the internal area required. Slabs provide structural, acoustic and fire resistance capabilities for the building, among others, and may embed piping or other installations. Reducing the net thickness of slabs by 10 cm reduces the building envelope height correspondingly, thus saving materials from slabs and walls, and energy via reduced conductive loss. Some good practices include using innovative technologies, including Deltabeam, Bubbledeck, and hollow core slabs in concrete construction. This kind of change can reduce building life-cycle embodied impacts by approximately 6%.

One Click LCA’s database includes 50+ pre-built slabs as well as ready-to-use solutions for most innovative beam and deck technologies. A module for creating and calculating your own constructions is also available.

It is also worth noting that having shorter grid spans for columns makes it possible to use lighter and less steel- and cement-intensive slabs. This will have to be balanced against the impact it has on the materials used in the columns and the potential impact on the future adaptability of the spaces. Some types of slab systems also have higher impacts, and care should be paid to the overall design and choice of the floor slabs used.
Souce: Eyad Sayhood, Mohammed Mahmood. “Non-Linear Behavior of Composite Slim Floor Beams with Partial Interaction”, European Journal of Scientific Research, 56(3):311-325, July 2011.

Potential carbon savings in the baseline building

6% In the example building the share of embodied carbon impacts for all slabs is around 45%. Reducing the net thickness of slabs leads to potential carbon savings of around 6%.
7

Do not build separate parking structures: apply parking policies to shift demand

If your zoning laws allow it, try to reduce the number of parking spots, in particular, underground parking spots and places in parking towers. If you have to have parking spaces below the building, consider raising the building so that the building stands on pillars with an open area for parking below the building. This will save a substantial amount of materials in needless walls around the parking spaces.

One Click LCA’s Carbon Designer module includes an optional calculation for underground parking floors. Further, operational transport carbon impacts can be accounted for using One Click LCA’s Site Designer.

Potential carbon savings in the baseline building

4.8% The share of embodied carbon impacts for parking structures is 7% (in the initial case with the parking mix heavily dependent on private cars). If the initial mix of underground and above-ground parking could be shifted to only above-ground parking places, these impacts would be approximately 69% lower, so an overall potential carbon saving of 4.8%.
8

Use movable or refurbishable wall elements to solve space redistribution issues

As floorplan configurations may often change, it is good practice to use reusable and possibly movable internal walls to the extent that they work for the building function. Similarly, electrification that tracks seating arrangements in office buildings. If this practice is not applicable to your project, consider applying construction methods that make it possible to remove the boards intact.

One Click LCA allows you to set the service life for each material to reflect their actually foreseen replacement frequency as well as eventual reuse.

Potential carbon savings in the baseline building

4% We have assumed that half of the internal walls in our example building are load-bearing, but that the rest would require rebuilding every decade to fit changing floorplan demands. In this case, the material life-cycle impacts would be around 4% higher, compared to a scenario where wall configuration could remain in place until the material reaches the end of its service life.
9

Avoid elements with limited value, e.g. in floorings, ceilings or facades

If your cladding or façade material provides mainly an aesthetic function, consider omitting the layer. If your internal ceilings are not providing e.g. acoustic or fire protection, the entire element could be removed. This will also allow better maintenance access to installations and cabling. The same considerations apply to flooring: a simple polished concrete floor could be a good option for some types of spaces (while not all).

Potential carbon savings in the baseline building

4% The share of embodied carbon impacts for internal ceilings is circa 1%. Furthermore, the building is cladded with an aesthetic steel facing, which has life cycle impacts of around 2%. Avoiding the flooring altogether would achieve impact reductions of around 4%.
10

Choose long-lived solutions for windows and roofing

Investing in durable materials means fewer replacements over time, which means fewer carbon emissions, less waste generated, lower life-cycle costs and less tenant disruption. What is a durable and suitable material for your market varies depending on the conditions, however, the principle remains the same.

Potential carbon savings in the baseline building

3% Depending on your project conditions, specifying longer-lived systems can save both carbon and money. This will be dependent on conditions but can achieve several percentage points of life-cycle embodied carbon reductions – in our example project between extreme cases the difference would be in the order of 3%.
These are our top 10 commandments, but there are many more. Including many innovative designs and products or applying some of the following practices:

  • Incorporate design for disassembly and other circular economy principles into your design.
  • Buy local materials wherever possible to reduce transport impacts.
  • Ensure structural material strengths are not generalized but optimized for different uses.
  • Reduce waste through careful specification and buying with takeback agreements.
  • Consider the longevity of the materials that you use – if it needs to be replaced frequently its impact will be greater.

What have we missed? Please let us know.

Ebook

7 steps guide to Building Life Cycle Assessment

Try One Click LCA for free

Get access to 14-day free trial of One Click LCA for Building & Infrastructure projects.

Knowledge straight into your inbox

Only the best content. Tailored for your needs.